|
1-4-4-9-proverka-urovnya-i-zamena-masla-v-mkpp.html
1.4.4.9. Check of level and oil replacement in MKPPThe sequence of check of level of oil is given below.
1. Establish the car on an equal surface.
2. Unscrew a jellied stopper and remove a washer.
3. Be convinced that oil in a transmission reaches level of the bottom edge of a jellied opening. If necessary finish oil level in a transmission to the established norm. Use oil of the same type that is filled in in a transmission.
- Quality of oil on API – GL-4 or GL-5.
- Viscosity of oil on SAE:
- the all-weather – SAE 75W-90;
- above 10°С – SAE 80W-90.
4. Establish a new washer and wrap a jellied stopper.
- The inhaling moment – 40–58 N · m.
- Procedure of replacement of oil in MKPP is described below.
1. Unscrew a drain stopper.
2. Merge oil in capacity.
3. Establish a new washer and wrap a drain stopper.
- The inhaling moment – 40–58 N · m.
4. Unscrew a jellied stopper and remove a washer. Fill in oil in a transmission to level of the bottom edge of a jellied opening.
- Quality of oil on API – GL-4 or GL-5.
- Viscosity of oil on SAE:
- the all-weather – SAE75W-90;
- above 10°С – SAE 80W-90.
- Volume of filled-in oil – 2,7 l.
5. Establish a new washer and wrap a jellied stopper.
| 