Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.6.1. Check of a belt of a drive of auxiliary units
2.6.2. Check of thermal gaps in the mechanism of a drive of valves
2.6.3. Compression check
2.6.4. Removal and installation of a chain of a drive of the mechanism of a gazoraspredeleniye
2.6.4.1. Removal
2.6.4.2. Removal of a natyazhitel of a chain
2.6.4.3. Removal of a chain of a drive of the mechanism of a gazoraspredeleniye
2.6.4.4. Installation of a chain of a drive of the mechanism of a gazoraspredeleniye
2.6.4.5. Installation of a chain of a drive of the mechanism of a gazoraspredeleniye
2.6.4.6. Installation of a support of the engine No. 3
2.6.4.7. Installation of a support of a bolt of fastening of a pulley of a cranked shaft
2.6.4.8. Installation of a cover of a head of the block of cylinders
2.6.4.9. Final installation
2.6.5. Replacement of laying of the block of cylinders
2.6.6. Replacement of a forward epiploon of a cranked shaft
2.6.7. Replacement of a back epiploon of a cranked shaft
2.6.8. Removal and engine installation
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

2-6-4-3-snyatie-cepi-privoda-mekhanizma-gazoraspredeleniya.html

2.6.4.3. Removal of a chain of a drive of the mechanism of a gazoraspredeleniye

Fig. 2.258. Combination of a shponochny flute of an asterisk of a cranked shaft with an adjusting label


Rotate a cranked shaft clockwise and combine a shponochny flute of an asterisk of a cranked shaft with an adjusting label, then establish the piston of the first cylinder in situation VMT (fig. 2.258).
Level adjusting labels on asterisks of camshafts so that they formed a straight line at alignment on the top horizontal surface of a head of the block of cylinders.

Fig. 2.259. Alignment of adjusting labels on asterisks of camshafts


Remove a chain of a drive of the mechanism of a gazoraspredeleniye.


«previous page
2.6.4.2. Removal of a natyazhitel of a chain
following page»
2.6.4.4. Installation of a chain of a drive of the mechanism of a gazoraspredeleniye