Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.13.1. Removal and installation of the sensor of temperature of cooling liquid of the engine
2.13.2. Removal and installation of the sensor of provision of a cranked shaft
2.13.3. Removal and installation of the sensor of provision of a butterfly valve
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

2-13-sistema-upravleniya.html

2.13. Control system





Fig. 2.340. Components of a control system of the car with the Z6 engine: 1–PCM block; 2–neutral switch; 3–the CPP switch (Models with a mechanical transmission); 4–sensor of pressure of the hydraulic booster of the steering mechanism; 5–the sensor of temperature of cooling liquid; 6–the air temperature sensor on an admission; 7–sensor of position of the crankshaft; 8–sensor of provision of a cam-shaft; 9–sensor of provision of a butterfly valve; 10-sensor of a mass consumption of air; 11-the forward sensor of concentration of oxygen with heating; 12-the back sensor of concentration of oxygen with heating; 13-sensor of barometric pressure; 14-KS


Components of a control system of the car with the Z6 engine are shown on fig. 2.340.

«previous page
2.12.2. Check of the coil of ignition with the built-in switch of a food
following page»
2.13.1. Removal and installation of the sensor of temperature of cooling liquid of the engine