Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.6.1. Check of a belt of a drive of auxiliary units
2.6.2. Check of thermal gaps in the mechanism of a drive of valves
2.6.3. Compression check
2.6.4. Removal and installation of a chain of a drive of the mechanism of a gazoraspredeleniye
2.6.5. Replacement of laying of the block of cylinders
2.6.5.1. Removal
2.6.5.2. Installation
2.6.5.3. Installation of a cover of the bearing of a cam-shaft
2.6.6. Replacement of a forward epiploon of a cranked shaft
2.6.7. Replacement of a back epiploon of a cranked shaft
2.6.8. Removal and engine installation
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

2-6-5-zamena-prokladki-bloka-cilindrov.html

2.6.5. Replacement of laying of the block of cylinders
Fig. 2.270. Laying of the block of cylinders: 1–cover of the bearing of a cam-shaft; 2–cam-shaft; 3–head of the block of cylinders; 4–laying of a head of the block of cylinders


«previous page
2.6.4.9. Final installation		 following page»
2.6.5.1. Removal