|
2-6-5-3-ustanovka-kryshki-podshipnika-raspredvala.html
2.6.5.3. Installation of a cover of the bearing of a cam-shaftEstablish a cam-shaft in position VMT of the cylinder No. 1, and establish a cam-shaft.
|
|
Fig. 2.275. Provision of installation of covers of bearings of a cam-shaft
|
Establish covers of bearings of a cam-shaft in the specified provisions, as is shown in drawing 2.275, and then temporarily tighten bolts of fastening of a cover of bearings No. 2 and cam-shaft No. 7.
|
|
Fig. 2.276. Order of a tightening of bolts of fastening of covers of bearings of a cam-shaft
|
Tighten bolts of fastening of covers of bearings of a cam-shaft in 2–3 passes evenly in an order shown in drawing 2.276. Inhaling moment: 11,3–14,2 N · m.
Establish other components as it should be, the return to removal.
Check a compression.
| 