Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from brake system
6.2.4. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.6.1. Removal
6.2.6.2. Installation
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of forward brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of lay brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 







f084bf0f Набор пробных линз

6-2-6-2-ustanovka.html

6.2.6.2. Installation

Establish a new axis of the hinge, having combined openings in a fork of the amplifier of brakes and a brake pedal.

Fig. 6.20. Check of installation of an axis of the hinge


Be convinced of that the axis of the hinge concerns a fork of the amplifier of brakes completely (fig. 6.20).
Check a brake pedal.
At completely released pedal of a brake, insert the new switch of signals of braking into an opening on a brake pedal.

Fig. 6.21. Povorachivaniye of the switch of signals of braking on 45 °


Fix the switch of signals of braking, having turned it counter-clockwise on 45 ° (fig. 6.21).

NOTE
Adjustment of a gap of a bolt of the limiter and the pedal limiter after the switch of signals of braking is reliably blocked, it is not required.

«previous page
6.2.6.1. Removal
following page»
6.2.7. Removal and installation of the main brake cylinder