Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from brake system
6.2.4. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of forward brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of lay brake system
6.2.15.1. Adjustment of lay brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 







f084bf0f

6-2-15-proverka-stoyanochnojj-tormoznojj-sistemy.html

6.2.15. Check of lay brake system





Fig. 6.56. Contour of lay brake system: 1–switch of lay brake system; 2–adjusting nut; 3–lever of the parking brake; 4–clip; 5–cables of lay brake system


Extend the lever of the parking brake (fig. 6.56) several times.
Press a brake pedal several times.
Check a course of the lever of lay brake system at a tension of the lever of the parking brake with the force equal of 98 N.
Piston stroke – 3–6 clicks.

«previous page
6.2.14.2. Installation
following page»
6.2.15.1. Adjustment of lay brake system