|
6-2-17-snyatie-i-ustanovka-gidravlicheskogo-bloka-antiblokirovochnojj-sistemy-tormozov.html
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
|
ATTENTION
Internal elements of the hydraulic block of anti-blocking system of brakes can be damaged when falling block on a firm surface. Watch to dropping the hydraulic block of anti-blocking system of brakes. Replace the hydraulic block of anti-blocking system of brakes if it underwent blow.
|
|
|
Fig. 6.61. Hydroblock of anti-blocking system of brakes: 1–socket; 2–brake highway; 3–knot of the hydraulic block of anti-blocking system of brakes, arm; 4–arm; 5–control unit of anti-blocking system of brakes; 6–hydraulic block of anti-blocking system of brakes
|
Remove the storage battery and a platform of the storage battery.
Remove a hose (models with a mechanical transmission).
Lift a socket cover in the arrow direction, pressing thus a cover uvula (fig. 6.62). Pull the socket to a forward part of the car and remove it.
|
|
Fig. 6.63. Drawing of adjusting labels on the brake highway and the hydraulic block of anti-blocking system of brakes
|
Put an adjusting label on the brake highway and the hydraulic block of anti-blocking system of brakes (fig. 6.63). Wind the socket with a protective tape to prevent hit of brake liquid inside.
Remove the brake highway.
|
|
Fig. 6.64. Removal of knot of the hydraulic block of anti-blocking system of brakes
|
As is shown in drawing 6.64, move an arm in the direction of an arrow and remove knot of the hydraulic block of anti-blocking system of brakes and an arm from a body.
| 