Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from brake system
6.2.4. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of forward brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.14.1. Removal
6.2.14.2. Installation
6.2.15. Check of lay brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








f084bf0f

6-2-14-2-ustanovka.html

6.2.14.2. Installation

Remove a rust and dirt from a contact surface of a brake disk and a wheel nave.
Combine the labels made before removal and establish a brake disk on a wheel nave.
Establish a brake shoe (outer side) on a support.
Clear an open part of the piston.

Fig. 6.54. Installation of the piston of the brake cylinder


Slowly rotating the piston clockwise with use of the special adaptation drown it completely inside (fig. 6.54).

Fig. 6.55. Scheme of installation of a spring of a brake shoe


Combine a spring of a brake shoe (inside) with a piston groove, and insert it in the arrow direction (fig. 6.55).
Establish a brake shoe (inside) in a support.
Establish other components as it should be, the return to removal.
After installation several times press a pedal of a brake and check the following:
– piston stroke of the lever of the parking brake;
– prikhvatyvany brakes.

«previous page
6.2.14.1. Removal
following page»
6.2.15. Check of lay brake system