Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from brake system
6.2.4. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of forward brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.14.1. Removal
6.2.14.2. Installation
6.2.15. Check of lay brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








f084bf0f

6-2-14-1-snyatie.html

6.2.14.1. Removal

Remove a cable of lay brake system.
Disconnect the brake highway.
Remove a brake shoe (outer side) from a support.

Fig. 6.52. Removal of a brake shoe


Pull a block of a brake disk (inside) in the arrow direction to take out it from a support, as is shown in drawing 6.52.

Fig. 6.53. Drawing of labels on a nave of a wheel and a brake disk


Put an adjusting label on a nave of a wheel and a brake disk (fig. 6.53).
Remove a brake disk.

«previous page
6.2.14. Removal and installation of the back disk brake mechanism
following page»
6.2.14.2. Installation