Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from brake system
6.2.4. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.10.1. Check of operation of the vacuum amplifier
6.2.10.2. Tightness check
6.2.10.3. Check and adjustment of length of an acting rod
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of forward brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of lay brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








f084bf0f

6-2-10-2-proverka-germetichnosti.html

6.2.10.2. Tightness check

Start the engine and let's to it work on single turns about 1 minute. Muffle it, having submitted vacuum to the amplifier. Several times press a brake pedal with usual effort and let out available vacuum. Be convinced that by pressing a brake pedal the gap between a pedal of a brake and the floor panel gradually increases. Start the engine. Press a pedal of a brake and hold it pressed, then muffle the engine. Take a pedal to the 30th force pressed near more and be convinced that the course of a pedal does not change.

«previous page
6.2.10.1. Check of operation of the vacuum amplifier
following page»
6.2.10.3. Check and adjustment of length of an acting rod