Mazda 3 since 2003
1. Operation and car maintenance
1.1. Car description
1.1.1. Dimensions and general view of the car
1.1.2. Technical characteristics
1.1.3. Identification data of the car
1.1.4. Podkapotnoye space
1.1.5. Refueling capacities of units and systems. Recommended operational materials
1.1.6. Keys, locks of doors, hatch, anticreeping system
1.1.7. Governing bodies and combination of devices
1.1.8. Information display
1.1.9. Electronic immobilizer (anticreeping system)
1.1.10. Heater, conditioner and system of ventilation of salon of the car
1.1.11. Lever of a drive of lay brake system
1.1.12. Seats
1.1.12.1. Adjustment of longitudinal provision of seats
1.1.12.2. Adjustment of an inclination of a back of a seat
1.1.12.3. Adjustment of a driver's seat on height
1.1.12.4. Adjustment of a lumbar support (a driver's seat)
1.1.12.5. Adjustment of head restraints
1.1.12.6. Electroheating of seats
1.1.12.7. Folding of a back of a back seat
1.1.12.8. Return of backs of a back seat to vertical situation
1.1.12.9. A clamp of a back of a back seat (cars with a body "sedan")
1.1.12.10. Adjustment of head restraints of back seats on height
1.1.12.11. Head restraint installation into the central passenger seat on back sitting
1.1.12.12. Armrest
1.2. System of passive safety
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

1-1-12-11-ustanovka-podgolovnika-na-centralnoe-passazhirskoe-mesto-na-zadnem-sideni.html

1.1.12.11. Head restraint installation into the central passenger seat on back sitting

If the central head restraint is not established into position, transportation of the passenger on the central place on back sitting is dangerous. At absence or the wrong adjustment of a head restraint the sharp deviation of the head back during car blow behind will lead to heavy injuries of a neck. The head restraint should be always in working situation if on the central place on back sitting there is a passenger. Be convinced of the correct installation of the central head restraint.

Fig. 1.126. Installation of the central head restraint


To establish a head restraint into position, pull it up before clamp operation. to lower a head restraint in non-working situation, press the button of a clamp and then press a head restraint down (fig. 1.126).

«previous page
1.1.12.10. Adjustment of head restraints of back seats on height
following page»
1.1.12.12. Armrest