Mazda 3 since 2003
1. Operation and car maintenance
1.1. Car description
1.1.1. Dimensions and general view of the car
1.1.2. Technical characteristics
1.1.3. Identification data of the car
1.1.4. Podkapotnoye space
1.1.5. Refueling capacities of units and systems. Recommended operational materials
1.1.6. Keys, locks of doors, hatch, anticreeping system
1.1.7. Governing bodies and combination of devices
1.1.8. Information display
1.1.9. Electronic immobilizer (anticreeping system)
1.1.10. Heater, conditioner and system of ventilation of salon of the car
1.1.11. Lever of a drive of lay brake system
1.1.12. Seats
1.1.12.1. Adjustment of longitudinal provision of seats
1.1.12.2. Adjustment of an inclination of a back of a seat
1.1.12.3. Adjustment of a driver's seat on height
1.1.12.4. Adjustment of a lumbar support (a driver's seat)
1.1.12.5. Adjustment of head restraints
1.1.12.6. Electroheating of seats
1.1.12.7. Folding of a back of a back seat
1.1.12.8. Return of backs of a back seat to vertical situation
1.1.12.9. A clamp of a back of a back seat (cars with a body "sedan")
1.1.12.10. Adjustment of head restraints of back seats on height
1.1.12.11. Head restraint installation into the central passenger seat on back sitting
1.1.12.12. Armrest
1.2. System of passive safety
1.3. Car use to destination
1.4. Elimination of the malfunctions which have arisen in a way or before a start of motion
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

1-1-12-1-regulirovka-prodolnogo-polozheniya-sidenijj.html

1.1.12.1. Adjustment of longitudinal provision of seats

ATTENTION
Carry out adjustment of a driver's seat only on the motionless car. It is dangerous to regulate a driver's seat under way the car. The driver can lose control over the car that is fraught with a road accident.


Fig. 1.115. Longitudinal adjustment of a seat


To move a seat forward or back, raise a bracket of a clamp and shift a seat in demanded situation. Then release a bracket to fix a seat on a place (fig. 1.115).
Check, that the bracket of a clamp returned to a starting position and a seat was reliably fixed on a place. For this purpose try to shift a seat forward and back.

«previous page
1.1.12. Seats
following page»
1.1.12.2. Adjustment of an inclination of a back of a seat