Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of brake system
6.2.2. Check of level of brake liquid in a tank of a hydraulic actuator of working brake system
6.2.3. Air removal from brake system
6.2.4. Check of the return valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.7.1. Removal
6.2.7.2. Installation
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of forward brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of lay brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








f084bf0f

6-2-7-1-snyatie.html

6.2.7.1. Removal

ATTENTION
Do not allow hit of brake liquid on the painted surfaces. At hit of brake liquid on the painted surface wash away it immediately.

Merge brake liquid.
Disconnect the socket of the sensor of level of brake liquid.
Disconnect brake магастраль, disconnect brake tubes from the main brake cylinder.

Fig. 6.23. A hose detachment from a tank with brake liquid


Disconnect a hose from a tank with brake liquid, pressing in a point designated in drawing by an arrow (fig. 6.23).
Unscrew two nuts of fastening, remove the union, the main brake cylinder and laying.

«previous page
6.2.7. Removal and installation of the main brake cylinder
following page»
6.2.7.2. Installation