Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Design and operation of the mechanism of transmission
3.3.3. System of electronic control (RSM)
3.3.4. Mechanism of switching of an automatic transmission
3.3.4.1. Principle of operation of the mechanism of switching of an automatic transmission
3.3.4.2. Check of blocking of switching
3.3.4.3. Check of blocking of the ignition key
3.3.4.4. Check of a cable of blocking
3.3.4.5. Check of the lever of the selector
3.3.4.6. Adjustment of a cable of a choice of transfer
3.3.4.7. Adjustment of the switch of a range of a transmission
3.3.4.8. Removal and installation of the lever of the selector
3.3.4.9. Installation of a cable of blocking
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

3-3-4-5-proverka-rychaga-selektora.html

3.3.4.5. Check of the lever of the selector

Turn the ignition key in the situation ON (the engine is switched off).
Be convinced of that when translating lever, at the pressed pedal of a brake, in each situation click is audible.
Be convinced of that the lever of the selector can be moved.
Be convinced of that when translating lever, at the pressed pedal of a brake, in each situation from R to l click is audible.
Be convinced of that in each position of the lever of the selector the corresponding indicator lights up.
If it not so, adjust the switch of a range of a transmission.

Fig. 3.79. Check of the lever of the selector


Check that the car works in each chosen range (fig. 3.79).

«previous page
3.3.4.4. Check of a cable of blocking
following page»
3.3.4.6. Adjustment of a cable of a choice of transfer