Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.6.1. Check of a belt of a drive of auxiliary units
2.6.2. Check of thermal gaps in the mechanism of a drive of valves
2.6.3. Compression check
2.6.4. Removal and installation of a chain of a drive of the mechanism of a gazoraspredeleniye
2.6.5. Replacement of laying of the block of cylinders
2.6.6. Replacement of a forward epiploon of a cranked shaft
2.6.7. Replacement of a back epiploon of a cranked shaft
2.6.8. Removal and engine installation
2.6.8.1. Removal
2.6.8.2. Removal of the socket of the main block of safety locks
2.6.8.3. Removal of support of the engine No. 3 and No. 4
2.6.8.4. Removal of a support of the engine and No. 4
2.6.8.5. Installation of a support of the engine and No. 4
2.6.8.6. Installation of a support of the engine No. 3
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

2-6-8-5-ustanovka-opory-dvigatelya-i-n4.html

2.6.8.5. Installation of a support of the engine and No. 4

Establish engine No. 1 and No. 4 support.

NOTE
At performance of this operation do not tighten a bolt and a nut of support of the engine No. 1 and No. 4.

Fig. 2.284. Bolt of fastening of a support of the engine No. 4


Tighten a bolt of fastening of a support of the engine No. 4, shown in drawing 2.284.

Inhaling moment: 66,6–93,1 N · m.

Fig. 2.285. Tightening of a bolt of fastening of a support of the engine No. 4 and arm of the storage battery


Tighten a bolt and a nut of fastening of a support of the engine No. 4 and an arm of a platform of the storage battery in an order shown in drawing 2.285.
Inhaling moment:
1–44–61 N · m;
2–6,9–9,8 N · m.

«previous page
2.6.8.4. Removal of a support of the engine and No. 4
following page»
2.6.8.6. Installation of a support of the engine No. 3