1.1.6.9. Remote control maintenance

If the system does not react to pressing of buttons on a remote control and the built-in indicator does not light up, – the element of a food of the panel was probably discharged. Replace a food element to restore operability of the panel.

Insert a food element into the panel so that marking of a positive pole (+) was turned down. At the wrong installation of an element of a food the electrolit leak is possible. At replacement of an element of a food be careful not to bend electric contacts and to save from pollution by oil. Watch that dirt did not get to the case of a remote control. It can put the panel out of action. If replacement is made incorrectly, there is a danger of explosion of an element of a food. At replacement use only elements of a food of the CR1620 type or completely equivalent of. At utilization of the served elements of a food observe the following rules:

– isolate positive and negative poles of an element of a food by means of cellophane or an insulating tape;

– do not assort food elements;

– do not throw food elements into fire or in water;

– do not deform and do not break food elements.