Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.1.1. Safety pedal of a brake
6.1.2. Vacuum amplifier of brakes
6.1.3. Main brake cylinder
6.1.4. Pressure regulator
6.1.5. Sensor of level of brake liquid
6.1.6. Anti-blocking system of brakes (ABS)
6.1.7. Management of dynamic stability
6.1.8. Control lamp of DSC
6.1.9. DSC system switch, control lamp of shutdown of DSC system
6.1.10. Incorporated sensor of management of dynamic stability
6.1.11. DSC HU/CM block of system of dynamic stability
6.1.12. Management of emergency braking
6.1.13. Local network of the controler (CAN)
6.1.14. Onboard diagnostics
6.2. Brake system
6.3. Tables
7. Onboard electric equipment
8. Body
 







f084bf0f

6-1-8-kontrolnaya-lampa-dsc.html

6.1.8. Control lamp of DSC

The control lamp of DSC is established in a combination of devices and notifies the driver on DSC activation (the car is in lateral sliding) or TCS activation (pro-slipping of a driving wheel) in a case when the DSC system is not disconnected by the DSC system switch.
When DSC and CAN system are serviceable, the control lamp of DSC system lights up on 2–4 спри ignition key turn – in the situation ON and is disconnected at check of functioning of a lamp. When the system works with failures, the control lamp of DSC remains included.
Operating modes of a control lamp of DSC are given in table 6.3.

«previous page
6.1.7. Management of dynamic stability
following page»
6.1.9. DSC system switch, control lamp of shutdown of DSC system