Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.1.1. Safety pedal of a brake
6.1.2. Vacuum amplifier of brakes
6.1.3. Main brake cylinder
6.1.4. Pressure regulator
6.1.5. Sensor of level of brake liquid
6.1.6. Anti-blocking system of brakes (ABS)
6.1.7. Management of dynamic stability
6.1.8. Control lamp of DSC
6.1.9. DSC system switch, control lamp of shutdown of DSC system
6.1.10. Incorporated sensor of management of dynamic stability
6.1.11. DSC HU/CM block of system of dynamic stability
6.1.12. Management of emergency braking
6.1.13. Local network of the controler (CAN)
6.1.14. Onboard diagnostics
6.2. Brake system
6.3. Tables
7. Onboard electric equipment
8. Body
 







f084bf0f

6-1-7-upravlenie-dinamicheskojj-ustojjchivostyu.html

6.1.7. Management of dynamic stability

The hydraulic mechanism of management of DSC HU/CM system and strategy of management of system are in essence borrowed from the previous model 323, except for the following:
– the DSC block and the hydraulic block are incorporated for increase of convenience of service;
– the sensor of a lateral overload and the sensor of angular speed of roving are incorporated for maintainability improvement;
– the sensor of pressure of brake liquid is built in DSC HU/CM;
– conclusions of input-output of the DSC HU/CM block are changed;
– the electric amplifier of emergency braking is used for safety increase;
– the switch of DSC system is used for shutdown of work of DSC;
– the DSC HU/CM system gives out a signal of speed on the audioblock, the screen wiper and washer switch, to the automobile navigation block, the executive mechanism of system of maintenance of speed of movement and the alignment control unit on wires, and also deduces a signal of speed through CAN;
– CAN communication system is used.

«previous page
6.1.6. Anti-blocking system of brakes (ABS)
following page»
6.1.8. Control lamp of DSC