Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.9.1. Removal and installation of system of an admission
2.9.1.1. Removal
2.9.1.2. Installation
2.9.2. Removal and installation of a regulator of idling
2.9.3. Removal and installation of a pedal of management by supply of fuel
2.9.4. Check and adjustment of a cable of a drive of a butterfly valve
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

2-9-1-1-snyatie.html

2.9.1.1. Removal

Uncover the storage battery.
Disconnect a negative wire from the storage battery.
Remove the bottom cover.
Uncover the socket and the PCM block socket.
Uncover the air filter and take out filtering element.
Remove the case of the air filter.
Uncover an air line of system of an admission and an air line.
Disconnect an air hose.
Remove the electromagnetic valve of a purge.
Merge from the engine cooling liquid.
Remove a throttle branch pipe.
Disconnect a tube of a retsirkulyatsiya of the fulfilled gases (from an inlet collector).
Disconnect a hose of cooling liquid of the engine from a pipe of cooling liquid of the engine.

Fig. 2.310. Arm of fastening of a cable of an accelerator


Remove an arm of a cable of an accelerator from an inlet collector (fig. 2.310).
Remove an inlet collector.

«previous page
2.9.1. Removal and installation of system of an admission
following page»
2.9.1.2. Installation