Mazda 3 since 2003
	1. Operation and car maintenance
	2. Engine
		2.1. General description of new engines of the L8, LF and L3 models
		2.2. Mechanical part of engines
		2.3. Appendix 1
		2.4. Appendix 2
		2.5. Appendix 3
		2.6. The Z6 engine – a mechanical part
		2.7. Greasing system
		2.8. Cooling system
		2.9. Admission system
			2.9.1. Removal and installation of system of an admission
			2.9.2. Removal and installation of a regulator of idling
			2.9.3. Removal and installation of a pedal of management by supply of fuel
			2.9.4. Check and adjustment of a cable of a drive of a butterfly valve
		2.10. Fuel system
		2.11. System of production of the fulfilled gases and system of decrease in toxicity
		2.12. Ignition system
		2.13. Control system
		2.14. Tables
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body

2-9-4-proverka-i-regulirovka-trosa-privoda-drosselnojj-zaslonki.html

2.9.4. Check and adjustment of a cable of a drive of a butterfly valve

Be convinced of that the butterfly valve is completely closed.

Fig. 2.317. Adjustment of a cable of a drive of a butterfly valve

Move a cable of a drive of a butterfly valve in the directions A and B, and check compliance of a gap of a cable of a drive of a butterfly valve to norm (fig. 2.317).

If the gap does not correspond to norm, adjust a cable gap a lock-nut of C.

Standard: 1,0–3,0 mm.

Inhaling moment: 9,8–14,7 N · m.

«previous page
2.9.3.2. Installation

following page»
2.10. Fuel system