Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.7.1. Check of pressure of oil
2.7.2. Replacement of engine oil
2.7.3. Installation of the oil filter
2.7.4. Removal and installation of the oil pallet
2.7.5. Removal and installation of the oil pump
2.7.5.1. Removal
2.7.5.2. Installation
2.7.6. Dismantling, check and assembly of the oil pump
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

2-7-5-2-ustanovka.html

2.7.5.2. Installation

Fig. 2.296. Installation of the oil pump


Establish laying of the oil pump on the oil pump (fig. 2.296).
Establish the oil pump with laying on the engine.
Add liquid in system of cooling of the engine.
Start the engine and check absence of leakage of oil.
If leakage of oil takes place, define a faulty element and repair or replace it.
Check pressure of oil.
Check oil level.
Check installation of a corner of an advancing of ignition and frequency of rotation of the engine idling.

«previous page
2.7.5.1. Removal
following page»
2.7.6. Dismantling, check and assembly of the oil pump