Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.3.1. Greasing system
2.3.1.1. Check of pressure of oil
2.3.1.2. Replacement of engine oil
2.3.1.3. Replacement of the oil filter
2.3.1.4. Removal and installation of a maslookhladitel
2.3.1.5. Removal and installation of the oil pallet
2.3.1.6. Removal and installation of the oil pump
2.3.2. Cooling system
2.3.3. Fuel system
2.3.4. Release system
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

2-3-1-6-snyatie-i-ustanovka-maslyanogo-nasosa.html

2.3.1.6. Removal and installation of the oil pump

Disconnect a negative wire of the storage battery.
Merge engine oil.
Remove the oil pallet.
Remove cетчатый the oil filter.
Remove directing to a chain of the oil pump.
Remove a natyazhitel of a chain of the oil pump.
Remove a spring of a natyazhitel of a chain of the oil pump.
Remove a chain of the oil pump.
Remove an asterisk of the oil pump
Remove the oil pump.
Installation make as it should be, the return to removal.
Check level of engine oil.
Start the engine and check absence of leakage of oil. In the presence of leak define a defective detail and repair or replace it.
Check pressure of oil.


Fig. 2.209. Components of the oil pump: 1–mesh oil filter; 2–directing to a chain of the oil pump; 3–natyazhitel of a chain of the oil pump; 4–spring of a natyazhitel of a chain of the oil pump; 5–chain of the oil pump; 6–asterisk of the oil pump; 7–oil pump; 8–bolts




«previous page
2.3.1.5. Removal and installation of the oil pallet
following page»
2.3.2. Cooling system