Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.3.1. Greasing system
2.3.1.1. Check of pressure of oil
2.3.1.2. Replacement of engine oil
2.3.1.3. Replacement of the oil filter
2.3.1.4. Removal and installation of a maslookhladitel
2.3.1.5. Removal and installation of the oil pallet
2.3.1.6. Removal and installation of the oil pump
2.3.2. Cooling system
2.3.3. Fuel system
2.3.4. Release system
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

2-3-1-4-snyatie-i-ustanovka-maslookhladitelya.html

2.3.1.4. Removal and installation of a maslookhladitel

Remove the bottom protective cover of the engine.
Merge cooling liquid (see further).
Remove the oil filter.

Fig. 2.204. Removal of a maslookhladitel: 1–water hose; 2–case of a maslookhladitel


Remove a maslookhladitel (fig. 2.204).
Use pure rags to wipe a landing surface on a maslookhladitel.
Installation make as it should be, the return to removal.
Check oil level. In case of need add oil.
Start the engine and check absence of leakage of oil. In the presence of leak define a defective detail, repair or replace it.

«previous page
2.3.1.3. Replacement of the oil filter
following page»
2.3.1.5. Removal and installation of the oil pallet