Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.10.1. Removal and installation of the block of the fuel pump
2.10.1.1. Removal
2.10.1.2. Installation
2.10.1.3. Check of leakage of fuel after installation of the block of the pump
2.10.2. Removal and installation of a fuel nozzle
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

2-10-1-1-snyatie.html

2.10.1.1. Removal

Disconnect a negative wire from the storage battery.
Remove a fuel tank.
Remove a quick-detachable connector.

ATTENTION
The cover of the fuel pump can be damaged, if the special adaptation is established on a cover leaky.
Reliably fix the special adaptation so that between uvulas of the special adaptation and a lateral surface of a cover there was no gap.



Fig. 2.322. Removal of a cover of the fuel pump


Uncover the fuel pump, using the special adaptation (fig. 2.322).
Remove the block of the fuel pump.

«previous page
2.10.1. Removal and installation of the block of the fuel pump
following page»
2.10.1.2. Installation