Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.5.1. Coolant
8.5.2. Air filter
8.5.3. Block of central air of air
8.5.4. Evaporator
8.5.5. Broad valve
8.5.6. Condenser
8.5.7. Check of a radiator of a heater
8.5.8. Removal and installation of a back air line
8.5.9. Removal and installation of the compressor of central air of air
8.5.10. Dismantling and assembly of the obgonny coupling
8.5.11. Adjustment of the obgonny coupling
8.5.12. Check of the obgonny coupling
8.5.13. Removal and condenser installation
8.5.13.1. Removal
8.5.13.2. Installation
8.5.14. Condenser check
8.5.15. Removal and installation of lines of a coolant (LF)
8.6. Tables
 








f084bf0f

8-5-13-1-snyatie.html

8.5.13.1. Removal

Disconnect a negative wire from the storage battery.
Discharge a coolant.
Merge from the engine cooling liquid.
Uncover an air line of system of an admission.
Remove an air line of system of an admission (Z6).
Remove the air filter (LF).
Remove a mudguard.
Merge working liquid of an automatic transmission (model with an automatic transmission).
Disconnect a cooler tube (top) and a cooler hose. Do not allow the passage of the remains of compressor oil from the line of a contour of cooling.

ATTENTION
At hit of moisture or impurity in a cooling contour, cooling ability of a contour it will be lowered, abnormal noise also will be audible.
Always close caps an open fitting after removal of any elements of a contour of cooling.

Disconnect a radiator hose from a radiator.
Disconnect an oil hose from a maslookhladitel (model with an automatic transmission).
Remove the fan of system of cooling.
Remove a maslookhladitel (models with an automatic transmission).
Remove a radiator with the established condenser.
Take away a hook of a radiator and extend the condenser, watch to spilling the oil remains from the condenser.

«previous page
8.5.13. Removal and condenser installation
following page»
8.5.13.2. Installation