Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.2.1. Removal and cowl installation
8.2.2. Adjustment of provision of a cowl
8.2.3. Removal and installation of the panel of a forward wing
8.2.4. Removal and installation of a front bumper
8.2.5. Removal and installation of a rear bumper
8.2.6. Doors
8.2.7. Removal and installation of a forward door
8.2.8. Removal and installation of a back door
8.2.9. Door adjustment
8.2.10. Adjustment of a door of a back
8.2.11. Removal and installation of glass of a forward door
8.2.12. Removal and installation of glass of a back door
8.2.13. Removal and installation of the block of a forward door
8.2.14. Removal and installation of the block of a back door
8.2.15. Window regulators
8.2.15.1. Main characteristics
8.2.15.2. The window regulator electric motor with the servo-driver
8.2.15.3. System of the servo-driver of locks of doors
8.2.15.4. Removal and installation of a regulator of a window regulator with the servo-driver
8.2.15.5. Removal and installation of the electric motor of a window regulator with the servo-driver
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.6. Tables
 







f084bf0f

8-2-15-1-osnovnye-kharakteristiki.html

8.2.15.1. Main characteristics

On the basis of pulse signals from contactless switches on the Hall sensor in the window regulator electric motor with the servo-driver the module of management of a window regulator in its main switch defines the provision of a window and the direction of movement of glass. Respectively, the main switch operates system of the servo-driver of window regulators from the driver.
When the starting position is established before car transfer, the provision of glass of a window and the direction of work are remembered in the management module in the main switch of a window regulator with the servo-driver. Thus, adjustment of a starting position is necessary if were disconnected: a cable – from a negative conclusion of the storage battery, the socket of the main switch or the socket of the electric motor of a window regulator with the servo-driver.

NOTE
If the starting position was not established, functions of automatic work of system of the servo-driver of window regulators from the driver, automatic return of glass and exact moving will not be available.

«previous page
8.2.15. Window regulators
following page»
8.2.15.2. The window regulator electric motor with the servo-driver