Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.2.1. Removal and cowl installation
8.2.2. Adjustment of provision of a cowl
8.2.3. Removal and installation of the panel of a forward wing
8.2.4. Removal and installation of a front bumper
8.2.5. Removal and installation of a rear bumper
8.2.6. Doors
8.2.7. Removal and installation of a forward door
8.2.8. Removal and installation of a back door
8.2.9. Door adjustment
8.2.10. Adjustment of a door of a back
8.2.11. Removal and installation of glass of a forward door
8.2.12. Removal and installation of glass of a back door
8.2.13. Removal and installation of the block of a forward door
8.2.14. Removal and installation of the block of a back door
8.2.15. Window regulators
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.6. Tables
 







f084bf0f

8-2-11-snyatie-i-ustanovka-stekla-perednejj-dveri.html

8.2.11. Removal and installation of glass of a forward door

Fig. 8.24. Installation flew down before removal


Establish glass of a forward door so that the distance from top of glass of a forward door to an overlay of a window made 210 mm (fig. 8.24).
Disconnect a negative wire of the storage battery.
Remove an overlay of a forward door.
Remove a cap.
Unscrew screws.

Fig. 8.25. Removal of glass of a forward door


Insert a hand into an opening of the block of a forward door and take out glass (fig. 8.25).
Establish as it should be, the return to removal.

«previous page
8.2.10. Adjustment of a door of a back
following page»
8.2.12. Removal and installation of glass of a back door