18.104.22.168. Assembly of components of the pump of the hydraulic booster
|Fig. 5.34. Installation of a clip of the pump of the hydraulic booster
Be convinced that the ear of a clip is fixed.
|Fig. 5.35. Epiploon installation in the forward case of the pump
Establish an epiploon in the forward case of the pump, using the special adaptation and a kapron hammer (fig. 5.35)
Place blades in a rotor so that the rounded edges were included into a cam (fig. 5.36)
|Fig. 5.37. Installation of a statorny ring in the forward case of the pump
Establish a statorny ring in the forward case of the pump a label up (fig. 5.37)
After installation of the back case manually turn a shaft to check smoothness of rotation.
Establish a shaft in the forward case of the pump.
Establish the pump and tighten three bolts of fastening.
Establish the socket of the sensor of pressure.
Establish a driving belt.
Pump over a hydraulic contour of the steering mechanism.
Check, whether there is no leak and a podtekaniye of working liquid of hydraulic system.
Make check and installation of a steering wheel.