Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.2. General checks
5.3. Working operations with the steering mechanism
5.3.1. Precautionary measures at work with system of passive safety (SRS)
5.3.2. Removal, check and installation of a steering wheel and steering column
5.3.3. Dismantling of the steering mechanism and steering drafts
5.3.3.1. Dismantling of steering draft
5.3.3.2. Dismantling of a shaft of a gear wheel and case
5.3.3.3. Dismantling of the top bearing and epiploon
5.3.3.4. Dismantling of an epiploon of the internal directing
5.3.4. Check of the steering mechanism and steering drafts
5.3.5. Removal and installation of the pump of the hydraulic booster
5.4. Tables
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

5-3-3-2-razborka-vala-shesterni-i-korpusa.html

5.3.3.2. Dismantling of a shaft of a gear wheel and case

Fig. 5.20. Case removal




Holding a gear wheel shaft, as is shown in drawing 5.20, take out the case and a gear wheel shaft.

NOTE
If the shaft of a gear wheel is not taken out by a hand, use a press.


Fig. 5.21. Extraction of a shaft of a gear wheel


To Vytolknita a gear wheel shaft from the valve case, as is shown in drawing 5.21.

Fig. 5.22. Removal of a lock ring of a shaft of a gear wheel


Accurately remove a lock ring, trying not to damage a gear wheel shaft.

«previous page
5.3.3.1. Dismantling of steering draft
following page»
5.3.3.3. Dismantling of the top bearing and epiploon