Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.6.1. Check of a belt of a drive of auxiliary units
2.6.1.1. Check procedure
2.6.1.2. Replacement of a driving belt
2.6.1.3. Check of an automatic natyazhitel of a driving belt
2.6.2. Check of thermal gaps in the mechanism of a drive of valves
2.6.3. Compression check
2.6.4. Removal and installation of a chain of a drive of the mechanism of a gazoraspredeleniye
2.6.5. Replacement of laying of the block of cylinders
2.6.6. Replacement of a forward epiploon of a cranked shaft
2.6.7. Replacement of a back epiploon of a cranked shaft
2.6.8. Removal and engine installation
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

2-6-1-1-procedura-proverki.html

2.6.1.1. Check procedure
Fig. 2.233. Check of a tension of a driving belt

Check the provision of a label of the indicator of an automatic natyazhitel of a driving belt (fig. 2.233).
If the provision of a label does not correspond to norm, it is necessary to replace a driving belt.

NOTE
In everyday occurences check of a deflection / tension of a driving belt is not required, as the tension of a belt is provided with an automatic natyazhitel.
«previous page
2.6.1. Check of a belt of a drive of auxiliary units		 following page»
2.6.1.2. Replacement of a driving belt