Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.3.1. Greasing system
2.3.2. Cooling system
2.3.2.1. Check of level of cooling liquid of the engine
2.3.2.2. Replacement of cooling liquid of the engine
2.3.2.3. Check of a stopper of a radiator
2.3.2.4. Removal and radiator installation
2.3.2.5. Radiator check
2.3.2.6. Removal and thermostat installation
2.3.2.7. Thermostat check
2.3.2.8. Removal, check and installation of the pump of cooling liquid
2.3.3. Fuel system
2.3.4. Release system
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

2-3-2-6-snyatie-i-ustanovka-termostata.html

2.3.2.6. Removal and thermostat installation

Remove an opening plate under a stopper.
Disconnect a negative wire of the storage battery.
Merge cooling liquid of the engine.
Remove a driving belt.
Remove a tank of a stekloomyvatel.
Remove the pump of the hydraulic booster of a steering.

NOTE
Remove the pump of the hydraulic booster of a steering, without disconnecting hoses and tubes.

Having weakened collars, disconnect bypass and bottom thermostat hoses.
Remove the thermostat case.
Establish as it should be, the return to removal.
Again fill in cooling liquid of the engine.
Be convinced of absence of leakage of cooling liquid.

«previous page
2.3.2.5. Radiator check
following page»
2.3.2.7. Thermostat check