Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.3.1. Greasing system
2.3.2. Cooling system
2.3.2.1. Check of level of cooling liquid of the engine
2.3.2.2. Replacement of cooling liquid of the engine
2.3.2.3. Check of a stopper of a radiator
2.3.2.4. Removal and radiator installation
2.3.2.5. Radiator check
2.3.2.6. Removal and thermostat installation
2.3.2.7. Thermostat check
2.3.2.8. Removal, check and installation of the pump of cooling liquid
2.3.3. Fuel system
2.3.4. Release system
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

2-3-2-4-snyatie-i-ustanovka-radiatora.html

2.3.2.4. Removal and radiator installation

Disconnect a negative wire of the storage battery.
Merge cooling liquid of the engine.
Remove the fan of system of cooling.
Remove an oil hose (models with an automatic transmission).
Remove water hoses and, having turned off fastening bolts, remove a radiator.
Establish details as it should be, the return to removal.
Again fill in cooling liquid of the engine.

Fig. 2.213. Radiator removal: 1–water hoses; 2–radiator; 3-bolts of fastening of a radiator


Be convinced of absence of leakage of cooling liquid.

«previous page
2.3.2.3. Check of a stopper of a radiator
following page»
2.3.2.5. Radiator check