Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.2. Suspension bracket
4.2.1. Forward suspension bracket
4.2.2. Removal, check and installation of the forward shock-absorber and spring
4.2.2.1. Removal
4.2.2.2. Check
4.2.2.3. Installation
4.2.3. Removal, check and installation of the forward stabilizer
4.2.4. Removal, check and installation of the forward top lever
4.2.5. Back suspension bracket
4.2.6. Removal, check and installation of the back shock-absorber
4.2.7. Removal and installation of a back cylindrical spring
4.2.8. Removal and installation of the back top lever
4.3. Tables
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

4-2-2-1-snyatie.html

4.2.2.1. Removal

Unscrew a bolt of fastening of the sensor of speed of a wheel.
Unscrew a bolt of fastening of an arm of a brake hose.
Unscrew a nut of fastening of a rack of the stabilizer and a bolt of fastening of the lower part of the shock-absorber.
Remove a dynamic damper.
Turn off a bolt of fastening of a fork of the shock-absorber.
Weaken, but do not turn off finally three nuts of fastening of the top cover of a rack of the shock-absorber.
Remove the shock-absorber in collecting and fix it at the special stand.
Close a spring a fabric and establish special adaptations.

Fig. 4.12. Removal of a nut of fastening of a rod of the shock-absorber


Compress a spring by means of the adaptation and unscrew a nut of fastening of a rod of the shock-absorber (fig. 4.12).

«previous page
4.2.2. Removal, check and installation of the forward shock-absorber and spring
following page»
4.2.2.2. Check