Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.4.1. General information
3.4.2. Forward power shafts
3.4.3. Removal and installation of a nave of a forward wheel
3.4.4. Removal and installation of a nave of a back wheel
3.4.5. Removal and installation of a nave of a back wheel
3.4.6. Removal and installation of a forward connecting shaft
3.4.7. Assembly and dismantling of a connecting shaft
3.4.8. Removal and installation of a power shaft (cars with a mechanical transmission)
3.4.8.1. Preliminary check of a power shaft
3.4.8.2. Removal
3.4.8.3. Installation
3.4.9. Removal and installation of a power shaft (cars with an automatic transmission)
3.4.10. Removal and installation of a power shaft (cars with a mechanical transmission)
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

3-4-8-3-ustanovka.html

3.4.8.3. Installation

Fig. 3.143. Installation on a connecting shaft of a new clip


Establish on a connecting shaft a new clip a cut up. Be convinced that diameter of a clip does not exceed norm (fig. 3.143).
After installation, measure external diameter.
If it differs from norm, repeat installation with use of a new clip.
Maximum external diameter: 31,2 mm.
Insert a power shaft into a wheel nave.

Fig. 3.144. Installation of a power shaft


Put transmission oil on a working edge of an epiploon (fig. 3.144).
Insert a power shaft into a transmission.
After installation pull the case of the internal hinge on itself to be convinced of reliability of fixing of a power shaft.
Installation of other components make as it should be, the return to removal.

«previous page
3.4.8.2. Removal
following page»
3.4.9. Removal and installation of a power shaft (cars with an automatic transmission)