Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.8.1. Measurement of temperature of cooling liquid
2.8.2. Replacement of cooling liquid of the engine
2.8.3. Removal and installation of the pump of cooling liquid
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

2-8-1-izmerenie-temperatury-okhlazhdayushhejj-zhidkosti.html

2.8.1. Measurement of temperature of cooling liquid

Will take temperature of cooling liquid and its density the thermometer and the areometer.
ATTENTION
The engine has aluminum elements which can be damaged by antifreeze on the basis of methanol or alcohol.
Do not use alcohol or methanol in cooling system.
Use only cooling liquid on a basis этиленгликоля.
For cultivation of antifreeze use only the soft (desalinated) water.
The mineralized water reduces efficiency of cooling liquid.



Fig. 2.304. The chart of a ratio of density and temperature modes of cooling liquid


Define necessary composition of cooling liquid using the provided chart (fig. 2.304).
If the composition of cooling liquid does not correspond to norm, add water or antifreeze.

«previous page
2.8. Cooling system
following page»
2.8.2. Replacement of cooling liquid of the engine