Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.1.1. Mechanical part of engines
2.1.2. Mechanism of change of phases of a gazoraspredeleniye
2.1.3. Greasing system
2.1.4. Cooling system
2.1.5. Fuel system
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
2.1.6.1. General information
2.1.6.2. System of decrease in toxicity
2.1.6.3. Chamber of damping of pulsations
2.1.7. Electric equipment of engines
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 







f084bf0f

2-1-6-1-obshhie-svedeniya.html

2.1.6.1. General information

The final collector settles down behind the engine.

Fig. 2.64. System of production of the fulfilled gases: 1–main exhaust silencer; 2–average pipe; 3–three-componental catalytic converter; 4–final collector; 5–H02S (a forward part); 6–HO2S (a back part); 7–L3 engine


This arrangement allows to use shorter exhaust pipes and to increase efficiency of release. Besides, thanks to the reduced distance to catalytic converter, the temperature of the fulfilled gases falls slightly therefore the catalyst works more effectively. Cooling of the fulfilled gases also is prevented by application of two-layer pipes of a final collector (fig. 2.64).

«previous page
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
following page»
2.1.6.2. System of decrease in toxicity