Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.1.1. Mechanical part of engines
2.1.2. Mechanism of change of phases of a gazoraspredeleniye
2.1.3. Greasing system
2.1.3.1. General information
2.1.3.2. Oil pump
2.1.3.3. Oil pallet
2.1.3.4. Oil filter
2.1.3.5. Valve of a maslorazbryzgivayushchy nozzle
2.1.3.6. Operation of valves maslorazbryzgivayushchy snuffled
2.1.4. Cooling system
2.1.5. Fuel system
2.1.6. System of production of the fulfilled gases and system of decrease in toxicity
2.1.7. Electric equipment of engines
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Greasing system
2.8. Cooling system
2.9. Admission system
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. Ignition system
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

2-1-3-6-rabota-klapanov-maslorazbryzgivayushhikh-sopel.html

2.1.3.6. Operation of valves maslorazbryzgivayushchy snuffled

Fig. 2.46. A place of an ustanvka of valves maslorazbryzgivayushchy snuffled: 1–valve of a maslorazbryzgivayushchy nozzle; 2–block of cylinders; 3–cranked shaft


Pressure of oil, influencing the return ball valve in the valve of a maslorazbryzgivayushchy nozzle, opens and closes the oil channel of a nozzle and operates the beginning and oil interruption of supply. The pressure of oil exceeding a certain value, influencing the return ball valve in the valve of a maslorazbryzgivayushchy nozzle, opens the oil channel of a nozzle, and there is an oil injection. On the contrary, at the pressure of oil which is not exceeding a certain value, the return ball valve is blocked by force of a spring and injection of oil stops.


«previous page
2.1.3.5. Valve of a maslorazbryzgivayushchy nozzle
following page»
2.1.4. Cooling system