Mazda 3 since 2003
1. Operation and car maintenance
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General information
3.2.2. Check and oil replacement in a mechanical transmission
3.2.3. Removal and installation of the sensor of a speedometer of the car (without anti-blocking system of brakes)
3.2.4. Epiploon replacement (differential)
3.2.5. Removal and installation of the mechanism of gear shifting
3.2.6. Coupling case, dismantling of elements of a case of the main transfer
3.2.6.1. Check of elements of primary shaft
3.2.7. Check and assembly of components of differential and case of the main transfer
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








f084bf0f

3-2-6-1-proverka-ehlementov-pervichnogo-vala.html

3.2.6.1. Check of elements of primary shaft

Fig. 3.48. Gap check between gear wheels of the 3rd and 2nd transfers


Measure a gap between gear wheels of the 3rd and 2nd transfers (fig. 3.48).
If the gap exceeds a maximum, check contact surfaces of gear wheels of the 2nd and 3rd transfers, couplings of the synchronizer of 3/4th transfers. Replace the worn-out and damaged details.
Gap: 0,05–0,20 mm.
At most: 0,25 mm.

Fig. 3.49. Gap check between a gear wheel of the 4th transfer and the bearing


Measure a gap between a gear wheel of the 4th transfer and the bearing (fig. 3.49).
If the gap exceeds a maximum, check contact surfaces of a gear wheel of the 4th transfer, the bearing and the coupling of the synchronizer of 3/4th transfers. Replace the worn-out and damaged details.
Gap: 0.17–0.37 mm.
At most: 0.42 mm.

«previous page
3.2.6. Coupling case, dismantling of elements of a case of the main transfer
following page»
3.2.7. Check and assembly of components of differential and case of the main transfer